Precision Matthews PM10x27" Lathe
Quickly change spindle
speeds just by flipping
the levers
speeds just by flipping
the levers
Solid tailstock clamp
to eliminate unwanted
movement.
to eliminate unwanted
movement.
 | |  | |  | |  |
Equipped with Thread
chasing dial, and 4 way
tool post. Also notice
the scraped ways for
better oil retention
and contact.
chasing dial, and 4 way
tool post. Also notice
the scraped ways for
better oil retention
and contact.
Many Standard
Accessories Included
at no extra charge!
Accessories Included
at no extra charge!
All geared headstock
with constant oil bath
lubrication, all shafts
are supported by ball
bearings, main spindle
by tapered roller
bearings. Shafts are
splined for extra
strength.
with constant oil bath
lubrication, all shafts
are supported by ball
bearings, main spindle
by tapered roller
bearings. Shafts are
splined for extra
strength.
Easy to read dials,
with inch and metric
graduations.
with inch and metric
graduations.
| Equipped with felt wipers to keep the chips out, and the oil in. |
| This lathe by Precision Matthews is a great machine for all types of general purpose turning work. Its compact size makes it great for shops with limited space, but you still get many great features like inch and metric threading, power feed on the carriage, quick change spindle speeds with a geared headstock, a very large spindle bore compared to other machines in this size range, plus this lathe operates from a standard 120 volt single phase outlet, so it can be used almost anywhere! All this and it still fits the tightest of budgets! Also, with excellent parts availability and after sale support, you can't go wrong! |
Standard Accessories:
- 5" 3 Jaw Chuck
- 5" 4 Jaw Chuck
- 9" Face Plate
- Dead Centers
- Live Center
- Stand with Cabinet
- Chip Tray
- Steady Rest
- Follow Rest
- 4 Way Tool Post
- Chuck Keys
- Wrenches
Main Specifications:
Swing Over Bed - 10"
Swing Over Carriage - 5"
Distance Between Centers - 27-1/2"
Spindle Bore - 1-1/16"
Spindle Speeds - 115-1620 RPM
Tailstock Taper - MT #2
Travel of Cross Slide - 4-1/2"
Travel of Compound - 2-3/4"
Inch Threads - 8-56 TPI, 20 kinds
Metric Threads - .5 - 3.0mm, 9 kinds
Spindle Bearing Type - Tapered Roller
Motor - 1 hp, 120 volts single phase
Swing Over Bed - 10"
Swing Over Carriage - 5"
Distance Between Centers - 27-1/2"
Spindle Bore - 1-1/16"
Spindle Speeds - 115-1620 RPM
Tailstock Taper - MT #2
Travel of Cross Slide - 4-1/2"
Travel of Compound - 2-3/4"
Inch Threads - 8-56 TPI, 20 kinds
Metric Threads - .5 - 3.0mm, 9 kinds
Spindle Bearing Type - Tapered Roller
Motor - 1 hp, 120 volts single phase
| Convenient lever to engage or disengage the leadscrew, eliminating unnecessary wear. |
| Equipped with lock out switch on belt/gear cover door for maximum safety to prevent accidental starting. |
