Precision Matthews PM16x60"G Lathe
 | |  | |  | |  |
Machine Standard Features and Equipment:
- ISO 9001 Certified
- Heavy Duty Spindle D1-6
- Solid Cast Iron Machine Base
- Each PM Machine Tested and inspected Before Shipment at our Warehouse in Pittsburgh, PA
- High Quality Electronics used Throughout Machine
- Heavy Duty Main Motor 6HP
- Heavy Duty Bed Width, 11.8”
- 12 Spindle Speeds from 32-2,000 RPM:
- Inch Threads 2-56 TPI
- Metric Threads .5-14mm
- Automatic Kick-Out Longitudinal Carriage Stop System
- Spindle is Balanced, Hardened and Precision Ground
- Spindle is Supported by High Precision Spindle Bearings
- All Gears and Shafts are Hardened and Precision Ground
- Guideways Induction Hardened and Precision Ground
- Lubrication System in Headstock and Feed Box
- 2 Year Warranty on All Parts including electrical
| For more information or to order any of our machines please call or email us at: 412-787-2876 sales@precisionmatthews.com |
Main Specifications:
- Max. Swing Over Bed 16”
- Max. Length of Work Piece 60”
- Max. Swing Over Cross Slide 9-1/4”
- Max. Swing in Gap 25”
- Width of Bed 11.8”
- Effective Length in Gap to Spindle 9 1/2”
- Effective Length in Gap to Chuck Jaws 3”
- Spindle Bore 2-1/32”, D1-6
- Taper of Spindle Center M.T.# 6
- Spindle Speeds 32-2,000 rpm / 12 steps
- Longitudinal Feeds 0.002-0.032 IPR
- Cross Feeds 0.0007-0.0095 IPR
- Inch Threads 2-56 TPI
- Metric Threads 0.5-14 mm
- Module Threads 0.5-14
- Diametral Pitch Threads 2-56DP
- Max. Travel of Top Slide 5”
- Max. Travel of Cross Slide 9-1/2”
- Max. Weight of Work Piece 700 LBS
- Longitudinal Leadscrew Diameter/Pitch 1-1/2” 4 TPI
- Diameter of Tailstock Quill 2-1/2”
- Max. Travel of Tailstock Quill 5.9”
- Taper of Tailstock Quill Center M.T. # 4
- Main Motor 6 HP, 220V/440V, 3 phase, pre-wired on 220V
- Coolant Pump Motor 1/8 HP, 220V/440V, 3 phase, pre-wired on 220V
- Net Weight, approx. 4,625 LBS
- Overall Dimensions, LxWxH 108” x 42” x 53”
Standard Equipment:
- Free Taper Turning Attachment, Installed
- Free Quick Change Tool Post Set with 5 holders
- 10” 3-Jaw Chuck with Set Reversible Jaws
- 12” 4-Jaw Chuck with Set Reversible Jaws
- Face Plate
- 3/4”-5 1/2” Capacity Steady Rest
- 3” Follow Rest
- Removable Gap
- Foot Brake
- Work Light and Coolant System
- One Shot Lube Pump on Apron for all Guideways
- Automatic Kick-Out Longitudinal Carriage Stop System
- Full Length Splash Guard
- (2) Dead Centers, 1 Live Center
- (1) Reducing Sleeve
- Thread Chasing Dial
- Leveling Pads
- High Quality Electronics Throughout Machine
- 2 Year Warranty on ALL Parts Including Electrical
Optional Equipment for Heavy Duty Lathes:
- DRO for #1660G, NEWALL C80 (England), 2 axis, free install............
- PM-DRO Sino for 1660G, 2 axis, Free Install ………………………......
- 5-C Hand Lever Type Collet Closer, free install ....……………….........
- 33 pc 5C collet set, from 1/16 to 1-1/16” by 32ndth, # 900-0014.........
- Taper Turning Attachment, free installation .......................................
- Quick Change Toolpost set with 5 holders ……………………….........