 | |  | |  | |  |
| For more information or to order any of our machines please call or email us at: 412-787-2876 sales@precisionmatthews.com |
Precision Matthews PM16x60" Lathe
Main Features:
- ISO 9002 Certified
- High Quality Siemens Electronics Used Throughout Machine
- Large Spindle Bore 2 -1/4"
- Heavy Duty Spindle D1-6
- One-Piece Solid Cast Iron Machine Base
- Heavy Duty Bed Width 12"
- Heavy Duty Main Motor- 7.5HP
- 12 Spindle Speeds From 25-2000rpm
- Inch Threads and Metric Threads Done WITH NO CHANGE GEARS NEEDED BETWEEN FEEDS, INCH and
METRIC THREADS, Only Gear Change is Needed, with Included Change Gears, To Cut DP and MP Threads - Spindle is Balanced, Hardened and Precision Ground
- Spindle is Supported at 3-point by High Precision Tapered Roller Bearings
- All Gears and Shafts are Hardened and Precision Ground
- Guideways Induction Hardened and Precision Ground
- Automatic Lubrication System in Headstock and Feed Box
- 2 Year Warranty for Parts
Main Specifications:
- Distance Between Centers 60"
- Max. Swing over Bed 16"
- Max Swing is Gap 25"
- Width of Bed 12"
- Spindle Mount/Bore D1-6 2-1/4
- Spindle Speeds, 12 steps 25-2000 RPM
- Leadscrew Pitch (Main) 4 TPI
- Cross Screw Pitch 10TPI (.100 Pitch)
- Longitudinal Feeds .011-.0633 IPR
- Cross Feeds .0003 to .01837 IPR
- Inch Threads 2 to 112 TPI
- Metric Threads 14mm to .1mm Pitch
- M.P. Threads 7mm to .1mm Pitch
- D.P. Threads 4 to 112 DP
- Travel of Cross Slide 12-1/4"
- Travel of Compund 5"
- Tailstock Quill Travel 2-3/8"
- Tailstock Taper MT#4
- Main Motor 7.5HP
- Machine Weight 4850 Pounds
- Power Requirements 220/440 3 phase 30 Amp at 220 volts
| High Quality Siemens Electronics for Longtime Reliability! |
| Modern, Easy to Use Headstock |
| Removable Gap for Large Diameter Work |
Standard Accessories:
- Taper Attachment
- Live Center
- 10” 3 Jaw Chuck with Set Reversible Jaws
- 12” 4 Jaw Chuck with Set Reversible Jaws
- 14” Face Plate
- 3” Follow Rest
- ¾”-5 1/2” Capacity Steady Rest w/ Roller Jaws
- Foot Brake
- Work Light and Coolant System
- Full Length Splash Guard
- Inch and Metric Threading Capability
- Thread Chasing Dial
- Free Quick Change Tool Post Set with 5 Holders
- Splash Guard
- Automatic Kick-out Longitudinal Carriage Stop
- (1) Reducing Sleeve
- 1 Shot Lube Pump on Apron for all Guideways
- Removable Gap
- (2) Dead Centers, (1) Live Center
- Tool Box and Leveling Pads
- Siemens Electronics throughout Machine
- 2 Year Warranty on all Parts
Optional Accessories:
- 2 axis DRO (installed)
- 5-C Lever Collet Closer
- 5-C Bison Collet Chuck