PM-1440GS 14″x40″ Gunsmith Lathe

Main Features Of This Machine:

  • 2″ Spindle Bore, allows larger work through the headstock
  • High Precision NSK Spindle Bearings
  • Available With or Without DRO as shown
  • MINIMAL CHANGE GEARS, Universal Quick Change Threading and Feed Gearbox, Only one gear change to cover the entire Inch and Metric Thread Ranges
  • BXA Quick Change Tool Post, Foot Brake, and much more included standard!
  • Cast Iron base for extra rigidity
  • 220V Single Phase Power, no phase converters needed
  • Short spindle length, 16-1/2″, great for gunsmithing operations through the headstock
  • Spindle Spider included, built in
  • True 4″ Travel Threading Dial – 32T Thread Dial Gear, 8TPI Leadscrew – Allows much easier threading
  • Priced very, very reasonably when compared with other similar models – And others are lacking the 2″ Spindle Bore, Wedge Type Tool Post, Cast Iron Base, and much more
  • Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
  • Backed by an industry leading 3 year warranty

$399 Flat Rate Shipping in the 48 US States – Any accessories ordered with machine at the same time also ship free of charge! (Will automatically calculate at checkout)

Liftgate Delivery is $49 per shipment if needed, this can be added at check out.


Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.

1 x PM-1440GS Lathe

PM-1440GS Lathe

Clear
$79.99

1/8-5/8 High Precision Keyless Drill Chuck MT4

Chuck

In stock

$174.99

BXA Master Turning/Boring Tool Set

Turning

In stock

$69.99

5/8 Turning Tool Set

Turning

In stock

$89.99

5/8 Turning Tool / 3/4 Boring Tool Set

Turning

In stock

$69.99

1/2 Internal/External Threading Tool Set

Threading

In stock

$69.99

3/8 Turning / 3/8 Boring Tool Set

Mini Turning

In stock

$399.99

1 x 8

Chuck

Available on backorder

$16.99

Anti Vibration Leveling Pads - (6 needed for this model)

Leveling Pads

In stock

From $4,999.00

1

Description

2

PM-1440GS Main Features
• High Precision Japanese NSK Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes
• 4-bolt Centering Provision (Known as a Spider) Included at outboard end of spindle, great for through spindle work, such as Gunsmithing or support other long parts that extend through the spindle bore
• Standard 3 jaw chuck has reversible bolt on jaws, for faster changing from O.D. to I.D. Holding
• D1-5 CAMLOCK SPINDLE MOUNT, with LARGE 2” Spindle Bore, Best in class for universal chuck mounting, and the ability to accept larger diameter work that can pass through the spindle for much easier setup
• Excellent value for the price, includes many of the accessories people eventually add, such as the Wedge Type Quick Change Tool post Set, LED Work Light, and more at no additional charge, pre-installed on the machine and ready to use
• Hardened and Ground gears and shafts in headstock for longer life
• Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.
• 3 HP Single Phase motor, no need for any special power source, will run from standard 220V Single Phase Outlet
• Rigid Cast Iron Base Construction, for deeper cuts, and more vibration dampening
• Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
• High quality electronics used throughout machine
• Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work
• Inch AND Metric thread cutting ability is a standard
• Minimal Change Gears needed for Inch threading, only 2 changes required for the full Inch threading range, one set covers 4-14 TPI, and the other set will cover the 16-112 TPI Range. Most gunsmithing work is covered in the 16-112 TPI Range, so normally, gear changes will not be required at all
• TRUE INCH PITCH main lead screw is 8 TPI, cross feed, tailstock, and compound slide lead screws are 10 TPI, which make it easier to use for the INCH measurement System
• Splash oil bath lubrication in Thread/Feed Gearbox, and Apron, for efficient lubrication, and long life, especially compared to traditional open-non lubricated Thread/Feed Gearbox design, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems
• Longest in class, 3 Year Warranty for added piece of mind

Included Accessories:

• 8” 3 Jaw Chuck, with bolt on, reversible top jaws
• 8” 4 Jaw Chuck
• Wedge Type quick change tool post set with 5 holders (straight, straight with V Groove, Parting, Boring, and Knurling Holders)
• Universal Quick Change Threading Gearbox (minimal gear changes)
• 12” Face Place
• Coolant System
• Spider Bolts
• Steady Rest
• Follow Rest
• Foot Brake
• Coolant System
• LED Work Light
• Cast Iron Stand
• Reducing Sleeve for headstock (To use a center)
• (2) Centers (Non Rotating)
• 3 Year Warranty

PM-1440GS Main Specifications

  • Max. Swing over bed 14”
  • Max. Swing over cross slide 8.77”
  • Max. Swing in gap 19.75”
  • Center Height 7”
  • Spindle Center Line Distance from Floor Approx. 46”
  • Max. Distance Between Centers 40”
  • Spindle Chuck Mount D1-5, Camlock
  • Spindle Face to Tail Stock Spindle Face Max Distance 43-1/4”
  • Width of Bed 7.362”
  • Bed Height 11.5”
  • Spindle Bore 2”
  • Spindle Taper, Internal MT #6
  • Spindle Mounting System Camlock, D1-5
  • Spindle Speeds 60-1800RPM, 8 Steps
  • Bed Length 54”
  • Lead Screw Diameter / Pitch 7/8” / 8 TPI
  • Feed Rod Diameter 3/4”
  • Inch Thread Cutting Range 4-112 TPI, List: 4, 4.5, 5, 5.5, 5.75, 6, 6.5, 7. 8, 9, 9.5, 10, 11, 11.5, 12, 13, 14, 16, 18, 20, 22, 23, 24, 26, 28, 32, 36, 38, 40, 44, 46, 48, 52, 56, 64, 72, 80, 86,92, 96, 104, 112
  • Metric Thread Cutting Range .1-7mm Pitch
  • Longitudinal Feed Range (Left and Right) .0016-.117 Inches Per Revolution
  • Cross Feed Range (In and Out) .0005-.032 Inches Per Revolution
  • Spindle Length through headstock, Protruding End to Chuck Mounting face Approx. 17”
  • Spindle Length through headstock, End to 3 Jaw Chuck face Approx. 19-3/4”
  • Max Carriage Travel, Along Bed Ways 38-1/2”
  • Cross Slide Travel 7”
  • Compound Travel 3-3/4”
  • Tail Stock Quill Diameter 1.259”
  • Tail Stock Quill Taper MT #4
  • Tail Stock Quill Travel 4”
  • Main Motor Horsepower 3HP
  • Speed Control Type Gear Shift Levers
  • Voltage / Phase/ Amps 220 Volts +/- 10%, 1 Phase / 12 Amps Max.
  • Max. Dimensions, Assembled (Includes cross slide handles) 51”H x 31”W x 71-1/2”L
  • Foot Print (without Handles Included) 71-1/2”L x 24” Front of chip pan to back of splash guard
  • Approximate Machine Weight, With Accessories and Base 1800 LBS (Cast Iron Base)
1

Shipping Information

2

$399 Flat Rate Shipping in the 48 US States – Any accessories ordered with machine at the same time also ship free of charge! (Will automatically calculate at checkout)

Machine ships fully assembled on the stand, and crated. It will be on a skid that is 76″Lx48″W for stability

Liftgate Delivery is $49 per shipment if needed, this can be added at check out.

1

Manuals & Documents

2

Click Here for Manual:  PM 1440GS 11 10 17 V1 Manual