PM-30MV Milling Machine

Main Features Of This Machine:

  • Extremely Reliable, Brushless DC Variable Speed Motor Included Standard
  • Belt Drive Design, For Smoother, Quieter Running
  • Extra Large Column To Base Mount
  • 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity
  • Larger Dials at Table Ends, Graduated in .001”, For Easier Reading,  And More Accurate Table Movements
  • Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
  • Machine Carries A 3 Year Warranty For Added Peace Of Mind
  • More Information below under the DESCRIPTION Tab below – It is NOT just the same old model with just a belt drive upgrade – Be sure to compare carefully

Flat Rate of $179 Shipping in the 48 States. All accessories ordered with machine at the same time ship at no additional charge. (Will automatically calculate at checkout)

Liftgate Delivery is $49 per shipment if needed, this can be added at check out.


Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.

1 x PM-30MV Milling Machine

Clear selection
$279.00

1 x X Axis Power Feed for PM-30MV Milling Machine

Power Feed

In stock

$199.00

1 x PM-30MV Optional Stand

Welded Steel Stand for PM-30MV Milling Machines. Shipped Free if purchased with the machine at the same time. Please see PM-30MV Main Product for more info.

In stock

$69.99

1/32-1/2 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$119.99

0-1/2 Ultra Precision Keyless Drill Chuck

Drill Chuck

Out of stock

$79.99

1/8-5/8 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$129.99

1/8-5/8 Ultra Precision Keyless Drill Chuck

Drill Chuck

In stock

$59.99

52 Pc. Clamping Kit, for 14mm / 9/16 T Slots

Clamp Set

In stock

$89.97

4 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$119.99

4 Inch High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$249.99

4 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Vise

In stock

$119.97

5 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$139.99

5 Inch High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$269.99

5 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Vise

In stock

From $1,899.00

Category:
1

Description

2

NEW model PM-30MV Milling Machine, with 8″x33″ Table, and much larger travels

Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES): 

  • MUCH Larger Travels and work area
  • Quill DRO Included Standard (This is for the spindle up/down movement) 
  • 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type
  • Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range
  • .001″ Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately – (One line on the dial is .001″, one full turn of the handwheel is .100″, much easier to use than those with odd metric conversions)
  • Precision ground ways for smoother movements – Not just rough milled
  • Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash
  • Split nuts on X and Y Axis to allow for backlash adjustment
  • DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped)
  • 3 Year Warranty, for added peace of mind

Standard Equipment

1. PM-30MV Milling Machine
2. Chip Tray
3. Variable Speed with Belt Drive and Brushless DC Motor
4. Way Cover Set
5. Drawbar
6. R8 Spindle Taper
7. Quill/Spindle Depth DRO
8. Spindle Locking Wrench

Optional Accessories
1. Stand
2. 3 Axis DRO Installed Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered)

Main Specifications:

Model No. PM30MV (DC Brushless Motor,and Belt Drive Head is Standard)
Max. Drilling Capacity 1-1/4″
Max. End Milling Capacity 3/4″
Max. Face Milling Capacity 3-1/2″
Table Size 8-1/4″ x 33″
Cross Travel (Y Axis) 8-3/4″
Longitudinal Travel (X Axis) 23″
Table Leadscrew Pitch 10 TPI (.100″ Per Turn)
Table Dial Graduations .001″
Vertical Travel (Z Axis) 16″
Max Distance Spindle to Table 17″
Taper of Spindle R-8, w/7/16-20 Drawbar Thread
Spindle Travel 3″
T Slot Size Actual size 14mm, our 9/16″ kit listed is sized for this machine
Range of Spindle Speeds 50-2250rpm, 2 Steps
Headstock Tilt Left & Right ±90°
Motor 2 HP
Net Weight (Not Including Base) 530 LBS
Net Weight (With Base) 605 LBS
Power Required 220V, Single Phase, 10 Amp

Dimensions
Optional Stand Height 28″
Table Surface Height (On Stand) 36″
Height, Head at normal working height (W/O Stand) 39”
Max Height, Head at top of travel (W/O stand) 48”
Height, Head at normal working height (On Stand) 67”
Max Height, Head at top of travel (On stand) 76”
Width, Tip to Tip of table handles 46-1/4”
Dimension Front To Back, from back of chip pan, to front table handle tip 31” (Can be pushed back against a wall, and table handle tip will be 31” from wall)

1

Additional information

2
Weight 550 lbs
Dimensions 33 x 33 x 45 in
1

Shipping Information

2

All small accessories ordered with machine ship at no extra charge!

Machine Ships Truck Freight at a flat rate of $179 in the 48 States. Liftgate Delivery Is Available for an additional charge of $49.00 if needed (If you do not have either a forklift / similar machinery to unload from truck level height, or a loading dock, you will need liftgate delivery)

This Liftgate option can be added at check out

1

Manuals & Documents

2

Click here for PM-30MV Manual (Tempory Manual, revised, in depth manual coming soon) PM-30MV Manual June 2017