PM-940M Milling Machine

PM-940M Main Features:

  • Heavier Class Milling Machine, (1350 LBS With Base) For More Rigidity, And Greater Cutting Ability, yet ships in 2 pieces (Base separately) so it is easier to handle
  • Larger Knee Mill Style Table Handles, for Much Better Control By Hand
  • Huge 12″ Y axis travel, matched with a 26″ X axis travel and generous 20″ Z travel allows room for those larger jobs. This machine has a larger work envelope than many full sized knee mills.
  • Real Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws (.100″ Per Turn) For Easier Operation – Not a close metric conversion like with many others
  • Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations
  • Base is Heavy Duty Cast Iron, For Excellent Vibration Dampening
  • Longest In Class, 3 Year Warranty

Click here for a comparison chart of the mills that we offer: PM Bench Mills Comparison

Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details of each configuration, “Manuals and Documents” has the manual and many other items of interest. 

Any accessories ordered and shipped with machine ship at no additional charge! (Including all accessory items from anywhere on our site, just add to cart and that will automatically calculate at checkout)

Shipping is a flate rate of $299 anywhere in the 48 US States

Liftgate Delivery $49 If Needed (Please Select At Checkout)


Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.

$2,999.00

PM-940M Milling Machine

Clear
$59.99

11 Pc. Precision R-8 Collet Set

Collet Set

In stock

$59.99

52 Pc. Clamping Kit, for 14mm / 9/16 T Slots

Clamp Kit

In stock

$69.99

1/32-1/2 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$79.99

1/8-5/8 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$119.99

0-1/2 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

$129.99

1/8-5/8 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

$89.97

4 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$119.99

4 Inch High Precision Milling Vise w/Swivel Base

Vise

In stock

$249.99

4 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Vise

Available on backorder

$119.97

5 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$139.99

5 Inch High Precision Milling Vise w/Swivel Base

Vise

In stock

$269.99

5 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Vise

Available on backorder

$19.99

Anti Vibration Leveling Pads - (4 needed for this model)

Level Pads

In stock

From $2,999.00

Category:
1

Description

2

Available Machine Options
* ALL Models below now come with knee mill style crank handles for
better feel and easier operation by hand, as shown in main
picture

* Cast Iron Base is included as standard equipment with these models. It is recommended to use the machine with the cast iron base, as the base provides support and accuracy to the longer Y Axis. This model is not available without the base. You are free to use the machine without the base, but we recommend to use this model with the included base.

The following options are available in this model (Please choose from drop down button above, which will show pricing and stock)


#1 PM-940M-BASIC Includes: Quill DRO, Cast Iron Base, Manual Down Feed on spindle – This model is for those who want a basic machine, and do not need the X and Z feed motors

#2 PM-940M-BASICw/HRDWYS – Same as #1, but with the hardened way option – Great for someone who will convert to CNC, who would remove the X and Z Feed Motors anyway, so it is sold without these. This version has the hardened ways, which greatly extended life, especially when converted to CNC

#3 PM-940M –  Includes: Quill DRO (For spindle depth measurement), Z Axis (Head) Positioning Motor (used to lift and lower head for positioning, eliminates the need to raise and lower head by hand cranking) X Axis Table Feed, Manual Down Feed on spindle, and Cast Iron Base

#4 PM-940M w/3axDRO – Same as #3, but with 3 axis Precision Matthews DRO Installed (Installed on Table X and Y Travels, plus Z axis head up/down travel – Note: the quill DRO, which is standard, is for the spindle travel, so this DRO does not duplicate that. The 3 axis reads the full head travel)

#5 PM-940M-PDF  Includes: Quill DRO (For spindle depth measurement), Z Axis (Head) Positioning Motor (used to lift and lower head for positioning, eliminates the need to raise and lower head by hand cranking) X Axis Table Feed, POWER DOWN FEED on spindle, and Cast Iron Base (Note: Same as #3, with the addition of Power Down Feed on spindle for boring operations)

#6 PM-940M-PDF w/3axDRO – Same as #5, but with 3 axis Precision Matthews DRO Installed (Installed on Table X and Y Travels, plus Z axis head up/down travel – Note: the quill DRO, which is standard, is for the spindle travel, so this DRO does not duplicate that. The 3 axis reads the full head travel)

#7 PM-940M-PDF w/HRDWYS – Same as #5, but with Hardened Ways on X and Y Axis for better wear resistance – longer life in heavier use situations or over time

#8 PM-940M-PDF w/HRDWYS&3axDRO – Same as #6 with the 3 axis DRO Installed, and also #7 with with Hardened Ways on X and Y Axis for better wear resistance – longer life in heavier use situations or over time – So this model has all options, Power Down Feed on spindle, 3 axis DRO Installed, and Hardened Ways 

 

Main Specifications of PM-940M:
Table Size: 9-1/2″x40″
Max. Recommended Table Load Capacity: 400 lbs (Centered)
Table T-Slot Size and Number: 14mm / 9/16″, 3 Slots
Table Travel, X Axis: 28″ Hand Only, 26″ w/ Power Feed
Table Surface Height from floor, 35″ (With base flat on floor)
Base Dimension at floor approx. 18-1/2″W x 27″D, with 5/8″ Bottom Holes for leveling pads/bolts
Normal Working Max Height: (top of column travel motor) 82″ (with base)
Height with head all the way up: (top of main motor) 85″(with base)
Stand (Base) height, to machine mounting surface: 24″
Cross Travel, Y Axis: 12″
Head Vertical Travel: 20″
Max. Distance Spindle to Table: 22″
Quill (Spindle) Travel: 5″
Lead Screw Type: Inch Pitch Acme Threads – 10TPI on X and Y Axis
Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S. Standard)
Quill Diameter: approx. 3″
Head Swivel: Side To Side, 90 Degrees
Power Required: 220 Volt, Single Phase, 10 Amp Supply
Main Motor Horsepower: 2 H.P. 
Casting Type: Fine Grain Cast Iron
Approximate Weight: 1350lbs with Base

Warranty: 3 Years

Click here to watch a video of the hardening process, and see pictures below (Only applies to the machines with hardened table/way option)   Table/Way Hardening Video

   

 

 

 

1

Shipping Information

2

Machine ships in 2 crates. Main Crate is 40″W x 40″L x 55″H 1100 pounds, And Base Ships in a separate crate, Base Shipping Dimensions 24″ W x 32″L x 28″ H, 350 pounds

Liftgate Is Available at $49 If Needed (Please select option at checkout)

1

Manuals & Documents

2

Click Here for PDF Manual Download:  PM 940M Manual

Click here for optional PM DRO Manual: PM DRO Manual 1-15-2018

Comparison Charts and other useful information:

Click Here for PM Bench Mills Comparison

Click Here for a useful document on Choosing And Using A Milling machine

Click here to watch a video of the hardening process (Only applies to the machines with hardened table/way option)   Table/Way Hardening Video