Skip to content
PM-1440GT-VS 14"x40" Ultra Precision Lathe

PM-1440GT-VS 14"x40" Ultra Precision Lathe

$13,499.00 - $13,499.00
$13,499.00
$13,499.00 - $13,499.00
$13,499.00
  • NEW! Variable Spindle Speeds, driven by a Hitachi VFD Adjust spindle speed on the fly, which allows for the best possible surface finishes. (Low 36-140RPM, Med 126-510RPM, High 500-2000RPM)
  • Machine can run on Single OR 3 Phase Power - No expensive phase converters needed if you only have standard 240V single phase available, it comes ready to operate on either
  • Photos shown are of PM-1440GT Model - The new PM-1440GT-VS Looks identical except for a different spindle speed range on the headstock. Photos to be updated shortly
  • Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available
  • 100% Made in Taiwan, no shortcuts taken, built to a very high level of quality
  • This model operates on either Single or 3 Phase power due to the Variable Frequency Drive - No expensive phase converters needed
  • Priced very, very reasonably when compared with other similar high quality models - and no one out there has the 2" Spindle bore in a machine from Taiwan. Compare Carefully. No one out there even comes close
  • Excellent machine for Gunsmithing use, Very Short Spindle, Ultra High Precision
  • High Precision, Hardened and Ground gears throughout headstock, which leads to extremely smooth and quiet running for a geared head lathe
  • Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
  • Backed by an industry leading 5 year warranty
  • Click here to see Details and Specifications below

$499 Flat Rate Shipping in the 48 US States – Any accessories ordered with machine at the same time also ship free of charge! (Will automatically calculate at checkout)

Liftgate Delivery is $79 per shipment and can be added at checkout, if needed.

Availability:
In stock
SKU B-PM-1440GT-VS

Lead times for NEW orders as of 9/17/25:
-If showing IN STOCK when model is selected in the "Choose Machine Option" dropdown, that machine model is in our warehouse and available for shipment.
-If showing Available On Backorder, the next available shipment ETA's are listed below:
**PM-1440GT-VS - Will update once current stock sells
NOTE: If machine is in stock, you will be charged in full at time of placement, no matter if ordered through our website, email, or over the phone.
-If machine is on backorder and ordered through our website, you will be charged in full at checkout.
-If machine is on backorder and ordered through email or over the phone, you can pay in full or you can place a minimum 20% Deposit Payment of the order's total at time of placement.

PM-1440GT-VS Main Features

  • This PM-1440GT-VS is a brand new model. This is the same as our popular PM-1440GT Lathe, but now with Variable Spindle Speeds, driven by a Hitachi Variable Frequency Drive, with 3 speed ranges. This allows you to dial in your speeds during operation, allowing for the best possible surface finishes.
  • Machine operates on both Single or Three Phase - No need for expensive converters if you only have single phase available 
  • Highest Quality Lathe, Made in TAIWAN
  • Large 2” Spindle Bore clear through spindle for through-headstock work
  • Short Spindle Length, only 15-1/2", perfect for gunsmithing work
  • Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.
  • Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
  • All gears and shafts in headstock hardened and precision ground for long life and extremely quiet running
  • FC-25 Meehanite Cast Iron used for rigidity and vibration dampening
  • Removable Gap for larger diameter work
  • High quality electronics used throughout machine
  • Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid micrometer carriage stop for repetitive work
  • High Precision Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes. Guaranteed Run Out +/- .0001" for ultimate precision
  • Inch AND Metric thread cutting ability is a standard feature
  • True INCH PITCH main lead screw, cross feed, and compound lead screws make it easy to use for the INCH measurement System, yet still has the Metric readings on dials for the ultimate in versatility for any job that may come about
  • Splash oil bath lubrication in Headstock, and Apron, for efficient lubrication, and long life, yet simple and reliable, maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems
  • Only Extremely High Precision Japanese Spindle Bearings are used, NACHI Brand at this time
  • Locking Tang in tail stock
  • Longest in the industry, 5 Year Warranty!

 

PM-1440GT-VS Standard Accessories

(Machine operates on both single or 3 phase)

  • Variable Spindle Speeds driven by a Hitachi VFD- Adjustable on the fly while running
  • Complete Base with Chip Tray
  • L.E.D. Work Light
  • NACHI (Japan) Spindle bearings, with +/- .0001" Max Spindle Runout
  • D1-5 Quick Change Spindle Mount
  • Back Splash Guard
  • Reducing Sleeve for Headstock Center
  • 4 Way Tool Post
  • Headstock Dead Center
  • Tail Stock Dead Center
  • Thread Chasing Dial (4” Travel Thread Dial, for easier inch thread cutting)
  • Feed Rod Clutch (To prevent overloading and using carriage stops)
  • Everything Needed for listed Inch and Metric Thread Pitches
  • Steady Rest
  • Follow Rest
  • Coolant System
  • Foot Brake
  • Belt Cover Interlock Switch
  • D1-5 Face Plate (12" Diameter)
  • (6) Pcs Cast Iron Leveling Pads with Bolts
  • 5 Year Warranty

*Note, chucks are not included standard, please select chuck option from the optional accessories if you need a chuck with your machine

Additional Specifications

  • Base Footprints: Headstock Base is 16.5 D x 14.25 W, Tailstock Base 16.5 D, 11.125 W, and 42-5/8" between the bases

Main Specifications

Compound Leadscrew Pitch 10 TPI
Cross-slide Leadscrew Pitch 10 TPI
Bed Length
Lathe bed length, excluding headstock, in inches
51 in
Bed Width
Front-to-back width of lathe bed
7.5 in
Distance Between Centers
Maximum distance between centers
40"
Follow Rest Capacity
Maximum diameter of workpiece supported by follower rest, in inches.
1 in
Gap Insert Length
Length of removable gap insert section of lathe bed, in inches
7.75 in
Internal Taper
Internal Taper of the headstock spindle
Internal MT5-1/2
Quill Tailstock Taper
Taper of the tailstock quill.
MT3
Spindle Bore Diameter
Diameter of Spindle Bore, maximum diameter of through-spindle workpiece, in inches
2"
Spindle Centerline to Floor
Distance between the centerline of spindle and the floor, using PM base, in inches
43 in
Spindle Face to Gap End
Maximum distance between face of spindle to the far end of lathe bed gap insert, in inches
5.5 in
Spindle Face to Tailstock Quill Face
Maximum distance between face of spindle and face of fully retracted tailstock quill, in inches
44 in
Spindle Length
Chuck mount face to left end of spindle, in inches
15.5 in
Spindle Length to Typical Chuck Face
Distance from left spindle exit face to typical chuck face, in inches
19.5 in
Steady Rest Capacity
Maximum diameter of workpiece that can be supported by steady (center) rest, in inches.
3 in
Swing over bed
Maximum diameter of workpiece that can clear bed, in inches
14 in
Swing over cross-slide
Maximum diameter of workpiece that can clear the cross-slide, in inches
8.75 in
Swing over gap
Maximum diameter of workpiece over lathe bed gap, with gap insert removed, in inches.
20.75 in
Main (Threading) Leadscrew Pitch 8 TPI
Spindle Mount Type
Mounting system for spindle.
D1-5 Camlock
Tailstock Leadscrew Pitch 10 TPI
Variant Base
Type of base/stand included with machine.
Steel Base

Travels

Saddle Travel
Maximum pure X-axis, longitudinal travel of saddle along Lathe bed, in inches.
36.25 in
Compound Travel
Maximum travel of compound (top slide), in inches
3.5 in
Cross-Slide Travel
Maximum pure Y-axis, in-and-out travel of the cross-slide on the saddle, in inches.
7 in
Quill Travel
Maximum extension of quill, in inches.
4 in

Table

DRO Specifications

Power Requirements

Amperage
Minimum Breaker/Circuit/Outlet size required for product
15
Voltage
Voltage Rating
220V
Phase
Phase type of line power supply
Dual 1Φ or 3Φ
Power Frequency
Power line frequency compatibility, in Hz
60Hz
Horsepower
Power output of motor, in HP
3
Plug supplied
Type of electrical plug or connection
Direct Wire, no wire or plug included

Motor and Drive

Motor Type
Type of Motor
AC with Variable Frequency Drive
Speed Adjustment
How the speed is adjusted.
Dual Stepped and Variable
Spindle Minimum Speed
Minimum Speed of the Spindle, in RPM
36
Spindle Maximum Speed
Maximum Speed of the Spindle, in RPM
2,000
Spindle Speeds
Available speeds for stepped drive machines, in RPM
50, 70, 95, 140, 180, 250, 340, 510, 700, 980, 1350, 2000

Cutting Capacities

Longitudinal Feed Rate Range
X-axis, left or right movement of saddle per revolution of spindle, in inches.
0.0026-0.0368 IPR
Cross-slide Feed Rate Range
Y-axis, in or out movement of cross-slide per revolution of spindle, in inches.
0.0013-0.0184 IPR
Inch Threads
Thread cutting capability for imperial threads.
Choice of 36, 3-56 TPI
Metric Threads
Threading capability for metric threads
Choice of 34, 0.4-7.2mm pitch

Unit Dimensions

Unit Length
Length of product in packaging, in inches
73 in
Unit Width
Width of product in packaging, in inches
30 in
Unit Height
Height of product in packaging, in inches
57 in
Unit Weight
Gross Weight of product in packaging, in lbs
1600 lb

Shipping Information

Shipping Length
Length of longest dimension of shipping skid or shipping box, in inches.
78 in
Shipping Width
Width of shipping skid or 2nd longest dimension of shipping box, in inches.
48 in
Shipping Height
Height of shipment on skid, or 3rd longest dimension of shipping box, in inches.
62 in
Shipping Weight
Approximate shipping weight when crated, palletized, or boxed up and ready to ship, in lbs.
1800 lb
Liftgate Eligible
Is this product suitable or eligible for Liftgate Delivery Service?
Yes
HS Code
Harmonized System Code for customs and tariffs
8458.19
Country of Origin
Primary Country of Manufacturing Origin
Taiwan

Machine Footprint

Footprint Depth
Minimum Front-to-Back space needed for clearance of machine, in inches
16.5 in
Footprint Width X-Axis
Minimum Left-to-Right space needed for clearance of machine, in inches.
68 in
All small accessories ordered with machine ship at no extra charge!

Machine ships LTL Truck Freight at a flat rate of $499 in the 48 States. Shipments to Hawaii, Alaska, Puerto Rico, or internationally need to be quoted by our Sales Team.

Shipping weight is approx. 1800 pounds, and ships fully crated, and on a skid which is 46"W x 78"L

Flat Rate Shipping

Standard Flat Rate LTL Freight Shipping services involve a 28′-48′ tractor trailer pulling up in front of your driveway and unloading your order at the curb. This is the extent of our flat rate shipping services. Carriers will NOT back their truck up your driveway, drive their truck down a dead end street, or use their liftgate to offload your machine into the bed of your pickup or trailer. Unless you have a loading dock, forklift, material handler, or other heavy equipment with forks, you will need to add Liftgate Service for $79.

Liftgate Service (Optional)

Liftgate Delivery service will get the machine from the back of the carriers truck down to the ground and up to 25' from that offloading point, provided those 25' are paved, level, and manageable by a single person with an unpowered pallet jack. If your shop/garage threshold is more than 25' from the curb end of your driveway and you don't have your own pallet jack, you will need to add Inside Delivery Service.

You MUST have a plan for how to get your machine from the curb to your shop. If you need additional delivery services, like Inside Delivery, box truck, or flatbed with forklift delivery (available in select locations), please contact us prior to your order being shipped to allow us to arrange and charge shipping accordingly. Some, but not all carriers and locations have 26′ box trucks available, but that is not guaranteed and your delivery plan should not depend on getting a box truck.

Inside Delivery Service (Optional)

The Inside Delivery option will, in appropriate situations, cause the driver to take your freight from the offloading point at the liftgate and move it into your shop or garage, as long as the route between those two points is relatively level, paved, and manageable using a standard pallet jack. This is for flat, paved driveways that are over ~30' from the curb to the threshold of your shop/garage.

Delivery Appointment

If you need the freight carrier to call you to schedule a delivery appointment after the machine arrives at their final terminal, but before attempting delivery of your machine, you will need to request a Delivery Appointment. This is most useful if/when you need to rent a forklift or take off work. This will add 1 day to your shipping time. Scheduling a Delivery Appointment more than 2 days from the date the freight arrives at your local terminal may incur daily storages charges that the customer will be responsible for.
Click Here for PM-1440GT Manual and Parts List:  (This is the PM-1440GT Geared Head Manual, VS will be updated and posted once finished - Everything is the same except for variable speeds on this model) PM 1440GT V10 2025 1

FAQs

Where can I find the full list of frequently asked questions?

Please visit our Frequently Asked Questions page for a full list of common questions.