BS-2 Full Universal Dividing Head Set, With 8″ Chuck (Can Cut Spirals)

$899.00

Main Features:

  • This unit gives you the ability to machine spiral gears/shapes
  • Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
  • Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
  • (3) Dividing Plates cover almost any division imaginable
  • Hardened Worm Gear for longer life
  • Worm gear disengages for direct indexing
  • Standard 40 to 1 ratio dividing head
  • Will index all divisions from 2 to 50, and most divisions from 52 to 380
  • 8” 3 Jaw Chuck Included
  • Includes tailstock
  • Backed by a 5 year warranty

Flat Rate of $149 shipping anywhere in the 48 US States (This unit is heavy, ships truck freight) (Or ships at no extra charge if ordered and shipped with a machine, will automatically calculate at checkout)

In stock

SKU: DIVIDINGHEAD-BS-2 Category:
1

Description

2

Main Features: 

  • This unit gives you the ability to machine spiral gears/shapes
  • Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
  • Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
  • (4) Dividing Plates cover almost any division imaginable
  • Hardened Worm Gear for longer life
  • Worm gear disengages for direct indexing
  • Standard 40 to 1 ratio dividing head
  • Will index all divisions from 2 to 50, and most divisions from 52 to 380
  • 8” 3 Jaw Chuck Included
  • Includes tailstock
  • Backed by a 5 year warranty

This set comes complete with everything as shown, as listed below:
12 Gears for spiral cutting feature
6″ 3 Jaw Chuck, with inside and outside jaws, and chuck wrench
Adjustable Tailstock
Dividing Plates (4 plates Total)
Spindle Center
Dog Driver (For use when turning between centers)
5 YEAR Warranty against any defective parts

Main Specifications:
Center Height: 5.23″
Swing: 10-1/2″
Spindle Bore (Clear Through): 1″
Spindle Mount: 1-1/2″ x 8 TPI
Spindle Taper Runout: .0006″
Gear Ratio: 40:1
Spindle Taper BS-10
Shipping weight: 148 LBS

1

Additional information

2
Weight 148 lbs
Dimensions 24 × 16 × 16 in
1

Shipping Information

2

Flat rate of $149 Shipping in the 48 US States (Ships at no extra charge if ordered and shipped with a machine, which will automatically calculate at checkout)

1

Manuals & Documents

2