PM-25MV Milling Machine
From $2,399.00
Main Features Of This Machine:
- Completely different factory, castings, and design than many others out there, GREATLY improved design
- Extremely Reliable, Brushless DC Variable Speed Motor Included Standard
- Belt Drive Design, For Smoother, Quieter Running
- Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range
- 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity
- Runs in both Forward and Reverse, Good for Tapping
- Larger Dials at Table Ends, Graduated in .001”, For Easier to Read, Accurate Table Movements
- Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
- Machine Carries A 3 Year Warranty For Added Peace Of Mind
- More Information below under the DESCRIPTION Tab below – It is NOT just the same old model with just a belt drive upgrade – Be sure to compare carefully
Click here for a comparison chart of the mills that we offer: PM Bench Mills Comparison
Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details, “Manuals and Documents” has the manual and many other items of interest.
Flat Rate of $199 Shipping in the 48 States. All accessories ordered with machine at the same time ship at no additional charge. (Includes optional stand below, and accessories from anywhere on this web site, add them to your cart and it will automatically calculate at checkout)
Liftgate Delivery is $79 per shipment if needed, this can be added at check out.
Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.
Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES):
- Quill DRO Included Standard (This is for the spindle up/down movement)
- 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type
- Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range
- .001″ Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately – (One line on the dial is .001″, one full turn of the handwheel is .100″, much easier to use than those with odd metric conversions)
- Precision ground ways for smoother movements – Not just rough milled
- Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash
- Split nuts on X and Y Axis to allow for backlash adjustment
- DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped)
- 3 Year Warranty, for added peace of mind
Standard Equipment
1. PM-25MV Milling Machine
2. Chip Tray
3. Variable Speed with Belt Drive and Brushless DC Motor
4. Way Cover Set
5. Drawbar
6. R8 Spindle Taper
7. Quill/Spindle Depth DRO
8. Spindle Locking Wrench
Optional Accessories
1. Stand
2. 3 Axis DRO Installed Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered)
New for 2023, Option DRO is now our PM LCD DRO as shown here:
- Main Specifications:
- Model No. PM25MV (DC Brushless Motor,and Belt Drive Head is Standard)
- Max. Drilling Capacity 1″
- Max. End Milling Capacity 3/4″
- Max. Face Milling Capacity 2/1/2″
- Table Size 27-1/2″ x 7-1/8″
- Cross Travel (Y Axis) 7″
- Longitudinal Travel (X Axis) 19″
- Table Leadscrew Pitch 10 TPI (.100″ Per Turn)
- Table Dial Graduations .001″
- Vertical Travel (Z Axis) 13″
- Max Distance Spindle to Table 13″
- Taper of Spindle R-8, w/7/16-20 Drawbar Thread
- Spindle Travel 2″
- T Slot Size Actual size 12mm, our 1/2″ kit listed is sized for this machine
- Range of Spindle Speeds 50-2500rpm, 2 Steps
- Headstock Tilt Left & Right ±90°
- Motor 1 HP
- Machine Height (Without Stand) 38-1/2”
- Stand Height (Stand is optional) 35-1/2” (New PM-25MV Stand with Leveling Feet only)
- Stand Dimensions: 13-3/4″W x 16-3/4″D (Top surface where machine mounts)
- Net Weight (Not Including Base) 275 LBS
- Net Weight (With Base) Approx. 340 LBS
- Country of Origin: China
- Power Required 110/120V, Minimum 15 Amp Circuit Approx. 5′ cord with standard 120V plug included
(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)
Power Head Lift, Power Drawbar, Spindle Brake and Quill Stop, Videos Below, More Info Here: www.priesttools.com
Powered Z Axis Kit Link (For a manual machine): Powered Z Axis
Power Drawbar, https://youtu.be/p-or4qxVYeY
Spindle Brake and Quill Stop: https://youtu.be/VdCIo8lRSSU
CNC Conversion Kit Info and Links Below:
Arizona Video: Arizona Video CNC Kits
Procut CNC: ProCutCNC.com
Shipping Crate Dimensions of this machine: 28″Wide x 28″Long x 34″High on a 34″x34″ pallet at approximately 400 Lbs.
All small accessories ordered with machine ship at no extra charge!
Machine Ships Truck Freight at a flat rate of $199 in the 48 States. Liftgate Delivery Is Available for an additional charge of $79.00 if needed (If you do not have either a forklift / similar machinery to unload from truck level height, or a loading dock, you will need liftgate delivery)
This Liftgate option can be added at check out
Machine Manuals:
Click Here for PDF Manual of this machine: PM 25MV V11 11 2022
Click here for optional PM DRO Manual: PM DRO Manual 1-15-2018
Click here for optional PM-25V Power Feed Installation: PM-25 Table power feed install V1 2-9-21
Comparison Charts and other useful information:
Click Here for PM Bench Mills Comparison
Click Here for a useful document on Choosing And Using A Milling machine
(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)
Power Head Lift, Power Drawbar, Spindle Brake and Quill Stop, Videos Below, More Info Here: www.priesttools.com
Powered Z Axis Kit Link (For a manual machine): Powered Z Axis
Power Drawbar, https://youtu.be/p-or4qxVYeY
Spindle Brake and Quill Stop: https://youtu.be/VdCIo8lRSSU
CNC Conversion Kit Info and Links Below: (These are 3rd party links only for reference, please do not contact us with questions or support as we are not affiliated with them, contact the vendors directly for fit, pricing, availability, technical questions, etc.)
Dave at ArizonaVideo Pictures of the kits shown here: Click Here for Photos Contact by email: davedaxx1@yahoo.com
Procut CNC: ProCutCNC.com
CNC Elements: (See product links in youtube description) Click Here for Instructional Video