PM-727V Milling Machine
From $2,899.00
Main Features Of This Machine:
- Variable Spindle Speeds, still with 6 geared steps, with all Hardened and Ground Steel gears in head, for much heavier
cutting capability, and the variable speed allows you to perfectly match the cut. The 6 step gearing allows for more power at lower speeds, and is designed so you not sacrifice power at the lower speeds - Compact Size for smaller work shops, but has more weight and power to
remove material when needed - Table Graduations in .001″ on X and Y with a true Inch Pitch
Leadscrew, leads to easier operation when tolerances matter - Main Column is attached to the base with 4 bolts from the top, with
a very wide mounting surface for much more rigidity over other
models in this size range - Only Requires Standard 120V Single Phase Circuit, so it can be
set up virtually anywhere, without needing additional circuits
installed in your work shop - 3 Year Warranty, for added peace of mind
- More Information Below
Click here for a comparison chart of the mills that we offer: PM Bench Mills Comparison
Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details, “Manuals and Documents” has the manual and many other items of interest.
Flat rate of $249 Shipping in the 48 US States. Any accessories ordered and shipped with machine ship at no additional shipping charge! (Including Optional Stand below, and all accessory items from anywhere on our site, just add to cart and it will automatically calculate at checkout)
Liftgate Delivery is $79 per shipment if needed, this can be added at check out.
Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.
Main Features:
- Variable Spindle Speeds, with a range from 40 to 3000 RPM, in 6 steps, allows you to perfectly match the speed for each job
- Compact, Accurate, Economical Machine. Great for those who are looking for a
- compact machine for a smaller work shop, yet need the ability to take heavier cuts
- compared with other machines in this size range
- Spindle is Supported by High Precision Tapered Roller Bearings
- Mill Head May be Tilted ±90° (both left and right)
- Precision Manual Fine Down Feed is standard
- Adjustable Tapered Gibs for longer life
- Positive Locks are standard for Table, Head, Quill, and Column
- Easy Reading Dials Have Satin Chrome Finish, Graduated in .001″
- Quill DRO is Standard, Accuracy of the Display 0.0005”, Selectable from
- mm/inch
- Generous 18-1/4″ Spindle To Table Max Distance for taller work
- 8-1/2″ Y Axis Travel, More than other machines in this class
- This is the same mill as our PM-727M, only with the addition of the variable speed
Standard Equipment
- PM-727V Milling Machine, with Variable Speeds (6 Steps, plus speeds are variable in each range)
- Way Covers
- Drawbar
- R8 Spindle Taper
- Quill DRO
- Chip Tray
Optional Accessoriy Notes:
3 Axis DRO Installed Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered)
New for 2023, Option DRO is now our PM LCD DRO as shown here:
Main Specifications:
Model No.: PM-727V
Max. Drilling Capacity: 1-1/4″
Max. End Milling Capacity: 1″
Max. Face Milling Capacity: 3″
Table Size: 27-1/2″ x 7-1/8″
Cross Travel (Y Axis): 8-1/2″
Longitudinal Travel (X Axis): 15″
Table Leadscrew Pitch 10 TPI (.100″ Per Turn)
Table Dial Graduations .001″
Vertical Travel (Z Axis): 16″
Max Distance Spindle to Table: 18-1/4″
Taper of Spindle: R-8, w/7/16-20 Drawbar Thread
Spindle (Quill) Travel: 3″
T Slot Size: 1/2″(T Slots are slightly less than 1/2″, actual size 12mm, our 1/2″ kit
is sized for this machine)
Range of Spindle Speeds: 40-3000rpm, 6 Steps, variable in each range
Head Tilt: Left & Right ±90°
Motor: 1.5 HP
Net Weight (Not Including Base): 475 LBS
Net Weight (With Optional Base): 575 LBS
Power Required: 110/120V, 20A Circuit
Power connection: Approx. 5’ cord, Includes 120V Plug with ground
Dimensions (Assembled on stand): 39″W x 74″H x 30″D
Height with head at top of Z travel: 80″ (On Stand)
Height with head at normal working height: 75″ (On Stand)
Optional Stand Height 32″
Country of Origin: China
Additional Specifications:
Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2”Wx21”D
Machine Base Dimension (Bolt Pattern) Approx. 11”Wx14-1/4”D
Table Height, machine base (Where it sits on the chip tray) to table, approx. 8-1/2″
Footprint of stand at floor, approx. 14-1/2″W x 21-1/4″ Front to back
(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)
Quill Stop, Spindle Brake, Power Lift, Power Drawbar: https://priesttools.com/product-category/precision-mathews/pm-727vm/
Shipping Crate Dimensions of this machine: 29″Wx29″Lx42″H on a 34″x34″ pallet.
Flat rate of $249 shipping in the 48 States. All accessory items ordered with machine ship at no additional charge! (Will automatically calculate at checkout)
Machine Ships Truck Freight. Liftgate Delivery Is Available for an additional charge of $79.00
This Liftgate option can be added at check out if needed.
Click Here for PDF Manual (This manual covers PM-727M and PM-727V): PM 727MV V6 2020 10
Click here for optional PM DRO Manual: PM DRO Manual 1-15-2018
Click Here for X Axis Table Feed Installation: Power Feed Install Bench Mill V1 4 29
Comparison Charts and other useful information:
Click Here for PM Bench Mills Comparison
Click Here for a useful document on Choosing And Using A Milling machine