NEW! PM-728VT Ultra Precision Milling Machine
From $3,699.99
Main Features Of This Machine:
THIS MACHINE IS A STEP ABOVE ANYTHING CURRENTLY ON THE MARKET!
- Ultra High Quality Milling Machine, Made to Exacting Standards. Nothing Else Compares To The Quality Level Of This Mill. If You Want The Best, This Is It. This machine is 100% Made in Taiwan. It Costs More, But You Get More. Much More. The Highest Level of Quality and Precision in a Bench Top Mill Available Anywhere.
- Super Precise Way Grinding Matched with Highly Skilled Precision Fitting and Scraping of Matching Way Surfaces and Gibs Make This Machine A Step Above Anything Else On The Market
- Larger Travels Than Comparable Models, Especially in the Y and Z Axis
- More Weight, Approx. 370 Pounds To Work With. Easy Enough To Move, Heavy Enough To Take Serious Cuts
- Ultra Precision Ground Spindle, with Triple Bearing Support
- Spindle is Supported by Angular Contact Bearings, Which Run Precise and Stay Cool at High Speeds
- Quill DRO Included Standard (This is for the spindle up/down movement)
- Worm Drive Gear for Easier Tramming of the Head
- Enlarged Z Axis Column for Unmatched Rigidity
- Industry Leading 5 Year Warranty
Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details, “Manuals and Documents” has the manual and many other items of interest.
Flat Rate of $199 Shipping in the 48 States. All accessories ordered with machine at the same time ship at no additional charge. (Includes optional stand below, and accessories from anywhere on this web site, add them to your cart and it will automatically calculate at checkout)
Liftgate Delivery is $79 per shipment if needed, this can be added at check out.
Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.
PM-728VT Ultra Precision Bench Type Milling Machine
NEW MODEL!
Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES):
- THIS MACHINE IS A STEP ABOVE ANYTHING CURRENTLY ON THE MARKET.
- Ultra High Quality Milling Machine, Made to Exacting Standards. Nothing Else Compares To The Quality Level Of This Mill. If You Want The Best, This Is It. This machine is 100% Made in Taiwan. It Costs More, But You Get More. Much More. The Highest Level of Quality and Precision in a Bench Top Mill Available Anywhere.
- Larger Travels Than Comparable Models, Especially in the Y and Z Axis
- More Weight, Approx. 370 Pounds To Work With. Easy Enough To Move, Heavy Enough To Take Serious Cuts
- Ultra Precision Spindle, with Triple Bearing Support. Deep Groove Ball, and Angular Contact Bearings Run Precise and Stay Cool at High Speeds
- Quill DRO Included Standard (This is for the spindle up/down movement)
- Features a Worm Drive Gear for Tramming Head
- Main Z Axis Column is attached to the base with 4 bolts, with a wide, proper mounting surface for much more rigidity over other models in this size range
- .001″ Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately – (One line on the dial is .001″, one full turn of the handwheel is .100″, much easier to use than those with odd metric conversions)
- Highest Precision ground ways, With Mating Surfaces Hand Scraped To Fit for Much Tighter and Smoother movements – Ultimate High Precision Fit Of Ways and Gibs With This Machine
- Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash
- Split nuts on X and Y Axis to allow for backlash adjustment
- DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped)
- 5 Year Warranty, for added peace of mind
Standard Equipment
1. PM-728VT Ultra Precision Milling Machine
2. Chip Tray
3. Variable Speed with Belt Drive and Brushless DC Motor,
4. Way Cover Set
5. Drawbar
6. R8 Spindle Taper
7. Quill/Spindle Depth DRO
8. Spindle Locking Wrench
Optional Accessories
1. Stand with Leveling Feet
2. 3 Axis DRO Installed (Choose Either the MX-100M DRO, or LCD/Graphic MX-200M, both are Magnetic and use the same scales) Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered, the head, and the quill)
DRO Choices:
MX-100M Standard: MX-100M DRO
MX-200M Graphic: MX-200M DRO
Both units above use the same scales, the display is the only difference in them.
Main Specifications of model PM-728VT Ultra Precision Milling Machine:
General Specifications:
Power Requirements: 120V, 20 Amp Circuit (Do Not Use Extension Cords!)
Weight: Machine Net Weight 370 Lbs, Shipping Weight 450 Lbs
Optional Stand Weight: Net Weight 100 Lbs, Shipping Weight 110 Lbs
Country of origin: Taiwan
Cutting Capacities:
Max. Recommended Drilling Capacity 3/4″
Max. Recommended End Mill Capacity 1″
Max. Recommended Face Milling Capacity 3″
Table Specifications and Travels:
Table Size 7” x 28″
Cross Travel (Y Axis) 8.5″ With Full Way Support, 10” to Travel Stop
Longitudinal Travel (X Axis) 17-3/4” With Full Way Support, 19” to Travel Stop
Vertical Travel (Z Axis) 16″
Max Distance Spindle to Table 16-1/4″
Spindle to Column Distance 8-1/2”
Table Leadscrew Pitch 10 TPI (.100″ Per Turn)
Hand Wheel Dial Graduations .001″
Leadscrew Pitch, X, Y, and Z Axis 10TPI
T Slot Size Actual size 12mm, our 1/2″ kit listed is sized for this machine
Head/Spindle/Motor Specifications:
Taper of Spindle R-8, w/7/16-20 Drawbar Thread
Quill/Spindle Travel 3″
Quill Diameter 2.362″ (60mm)
Range of Spindle Speeds 75-4000 RPM, 2 Steps, Variable
Headstock Tilt Left & Right ±90°, With Worm Gear Movement For Easier Tram Adjustments
Motor 1 HP, Brushless DC Variable
Dimensions:
Height (Without Stand) Head At Normal Working Height 36”, Head at Max Travel 44-1/2”
Table Surface to Machine Bottom (Where it sits on the stand or a table) 8-1/2”
Bolt Mounting Pattern of Machine (Where it bolts to the stand) 10-1/8”W x 17-1/2” D, 1/2” Holes
Bottom of machine casting 20-3/4 Deep x 12-1/2” W – 3-1/4 High at Mounting Bolt Surface
Chip Pan Dimensions 21-1/2” W x 24-3/4” D
Stand Height (Stand is optional) 32”
Machine Height (Mounted On Stand) Head At Normal Working Height 68”, Head at Max Travel 76-1/2”
Max Depth, Distance From Rear of machine to front Y Axis Handle Tip 30”
Max Width, Table Handle Tip to Tip 41”
Cord Connection/Type: Plug Included, Standard 120V NEMA-5-15, Cord approx. 5′ length
(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)
Power Head Lift, Power Drawbar, Spindle Brake and Quill Stop, Videos Below, More Info Here: Priest Tools
Shipping Crate Dimensions of this machine: 30″Wx30″Lx40″H on a 34″x34″ pallet.
All small accessories ordered with machine ship at no extra charge!
Machine Ships Truck Freight at a flat rate of $199 in the 48 States. Liftgate Delivery Is Available for an additional charge of $79.00 if needed (If you do not have either a forklift / similar machinery to unload from truck level height, or a loading dock, you will need liftgate delivery)
***NOTE Any deliveries are Curb Side Only, the trucks can NOT leave a public roadway as they are heavy and have a chance of cracking any driveway. These are shipped by standard truck freight, and a freight truck must have reasonable access to your home. If this is not the case, you will need to make arrangements to pick up at the freight terminal or have it delivered to a place that is suitable for a typical truck delivery. They will NOT be able to back on to your driveway, but they will have a pallet jack to move it around so if you have a typical flat, paved drive, it should be no problem. If not, please make arrangements before ordering***
This Liftgate option can be added at check out
Machine Manuals:
PM-728VT Ultra Precision Manual, Click here: PM 728VT Manual
Stand Assembly Instructions: Stand Assembly Instructions
MX-100M DRO manual: MagXact MX-100M Mill DRO V1 9-1-2021
MX-200M DRO Manual: MagXact MX 200M Mill V1 12 1 21
X Axis Table Feed Installation Instructions: PM 728V T Table Power Feed Install V1 9 24 20
Ultra Precision CNC Ball Screw Kit Installation Diagram: PM-728VT Ball screw kit-2021 V2
Ultra Precision CNC Ball Screw Kit Part Numbers: CNCBallScrewKit PM 728VTPartNumbersv1
Useful Information:
Click Here for a useful document on Choosing And Using A Milling machine