PM-739M Milling Machine

Brand new model for 2023! 

Model PM-739M 

Precision Geared Head Vertical Knee Type Milling Machine (Geared head, machine has 6 spindle speeds which are chosen by selector knobs on the head)

Typical Users:

• Industrial users looking for a good quality, smaller vertical knee type milling machine, built for lighter R&D / repair shop type use, with a smaller size to save space, at a lower price point
• High end gunsmiths looking for a smaller knee type milling machine, who wish to maintain the quality and features of a full sized knee mill, but also want to save on space / cost
• Users who appreciate the operational differences when going to a knee type milling machine over a bench style mill
• Any other users who can appreciate an entry level knee mill, at a very reasonable price

Main High Quality Features:

• High Grade HT200 Castings
• Design is exclusive to us. You will not find another machine that stacks up in features, and price
• Same head as used on our bench mills, but now available as a knee mill
• Long 5″ Quill Travel
• Tramming Ability in X AND Y Directions: Head Swivels Left and Right, AND Tilts Front To Back (approx +/-10 degrees) to set spindle to table tram, only machine in this size class with this feature – Allows tramming in all directions – Perfect alignment for the high precision jobs – Very critical, great feature for extremely high precision work!
• Generous 19-1/2″ spindle to table distance
• COMPARE EVERYTHING WITH OTHER MILLS ON THE MARKET – NONE EVEN COME CLOSE
• Inch Pitch lead screws, for ease of use and greater accuracy (10TPI Screws, .100″ per turn)
• Precision Spindle with +/- .00025” or less runout for greater tool life and accuracy
• Longest in class 3 YEAR WARRANTY against defective parts, including electrical 

Main Specifications: 

• Model PM-739M
• Table Size 7-1/2”x39”
• Table T Slot Size / Spacing Between: 9/16″ / 2″
• X Axis Travel 25″
• Y Axis Travel 8-1/2” (Shorted by 1″ to 7-1/2″ with X DRO Scale on rear of table)
• Z Axis Travel (Knee) 17-1/2”
• Min/Max. Distance, Spindle to Table 2”/19-1/2”
• Spindle Height: Floor to Bottom of Spindle: 53”
• Head Tilt, Front to Rear: 15 Degrees
• Head Tilt, Left to Right: 45 Degrees
• Table Height: Fully Raised 51”, Lowered 33-1/2”
• Quill Travel 5”
• Leadscrew Type Precision Ground ACME Leadscrew W/ Backlash Adjustments on X and Y Axis
• Leadscrew Pitch .100” (10 Threads Per Inch)
• Table Dial Graduations .001”
• Spindle Taper R8
• Spindle Speeds 90, 210, 345, 670, 1180, 1970
• Spindle Bearing Type: Tapered Roller Bearings
• Spindle Bearing Class C5
• Main Motor H.P. 2 HP
• Overall Height, Head Up 83″
• Height with head down (For moving and shipping) 72”
• Depth Front to back, rear of machine to front of knee casting 32” (Includes chip tray protruding from rear)
• Rear of machine to tip of Y axis handle 40”
• Width X Axis Table Handles, Tip to Tip 53”
• Net Weight 1100 LBS
• Voltage / Phase 220 Volt, Single Phase, 20 Amp Circuit
• Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)
• Warranty: 3 Years
• Country of Origin: China
• Shipping Dimensions: LxWxH 48”Wx42”Lx88” H

This mill ships fully crated, crate measures 48″L x 42″W x ~88″H (Head ships rotated in the crate To Lower Overall Height) – Crating charge is included in shipping above, we FULLY CRATE these models, so your machine will be very well protected for shipping!

Liftgate Service is available for this machine, please select this at checkout if needed.

Click Here for PM-739M Manual: COMING SOON

Click here for optional PM DRO Manual: PM Mill DRO 1 2 2023 V1