PM-833TV Ultra Precision Milling Machine

  • Very High Quality Milling Machine, 100% Made in Taiwan
  • Belt Drive, Variable Speeds, 50-3200 RPM
  • Built For Those Users Who Are Looking For Higher Quality In A Dovetail Type Mill Configuration
  • Very Large Y and Z Travels Compared With Other Models In This Class, over 11″ Of Y axis Travel
  • One Shot Lube System Standard
  • Very High Grade Castings Used Throughout Machine
  • Industry Leading 5 YEAR WARRANTY

Click here for a comparison chart of the mills that we offer: PM Bench Mills Comparison

Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details, “Manuals and Documents” has the manual and many other items of interest. 

Power Requirement is 220V SINGLE PHASE

Any accessories ordered and shipped with machine ship at no additional shipping charge! (Including Optional Stand below, and all accessory items from anywhere on our site, just add to cart and it will automatically calculate at checkout)

Flat Rate Shipping, $199 anywhere in the 48 US States, Liftgate $49 If Needed


 Please add accessories as desired, then press Add To Cart. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart. 

$3,899.00

PM-833TV Variable Speed Milling Machine

Belt Drive

In stock

$0.00

PM-833T Optional Stand

Welded Heavy Duty Steel Stand, with built in chip tray, for PM-833T Milling Machine Includes Leveling Bolts and Pads
Clear
$349.99

PM-833T-X-(Table) PowerFeed

X Axis Power Feed Kit for PM-833T Milling Machine, Includes everything needed to install X axis Power Feed on the PM-833T Milling Machine.   110V Power, Standard 110V Plug Supplied.

In stock

$379.99

PM-833T-Z-(Head) PowerFeed

Z Axis Power Feed Kit for PM-833T Milling Machine, Includes everything needed to install Z axis Power Feed on the PM-833T Milling Machine.   110V Power, Standard 110V Plug Supplied.

In stock

$599.99

PM 3 Axis Mill DRO - 12x24x20 Inch Scales - Customer Install

DRO

In stock

$399.00

Installation of above 3 axis DRO

Install
$59.99

11 Pc. Precision R-8 Collet Set

Collet Set

In stock

$129.99

Ultra Precision 11 Pc. R-8 Collet Set

In stock

$59.99

52 Pc. Clamping Kit, for 16mm / 5/8 T Slots

Clamp Set

In stock

$79.99

1/32-1/2 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$89.99

1/8-5/8 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$119.99

0-1/2 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

$129.99

1/8-5/8 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

$89.99

2 Inch Boring Head Set, R8 Shank

With HSS Boring Bars

Out of stock

$89.97

4 Inch Ground Milling Vise w/Swivel Base

Vise

Out of stock

$119.99

4 Inch High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$249.99

4 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$119.97

5 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$139.99

5 Inch High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$269.99

5 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$169.99

Coolant System - Flood Type

Universal Flood Type Coolant System

Available on backorder

From $3,899.00

1

Description

2

Typical Users:

• Industrial users looking for a top quality, bench type milling machine, built for industrial
use, with a smaller size compared with a full sized mill, to save space
• High end gunsmiths looking for a smaller bench type milling machine, who wish to maintain the
quality and features of a Taiwan made machine, but also want to save on space
• Users who appreciate a high end, bench type milling machine with the space saving
characteristics this offers
• Any other users who can appreciate a top quality machine with full features and no shortcuts,
in a smaller space-saving size, at a very reasonable price for the level of quality that you are
purchasing
Main High Quality Features:

• VFD Driven VARIABLE SPEED BELT DRIVE, 50-3200 RPM (This is the difference between this and the 833T Model which is a geared head machine, same machine otherwise)
• High Grade Castings
• Head Swivels 90 degrees Left and Right for angled milling / drilling operations
• Hand Scraped way Surfaces for better oil retention and fit, which leads to ultra smooth and very accurate movements
• One Shot Lubrication system is standard equipment, which also extends machine life, and reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping a lever
• High precision Inch Pitch lead screws, for ease of use and greater accuracy (10 TPI Screws)
• High Precision Spindle with +/- .0002” or less runout for greater tool life and accuracy
• Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when drilling and precision boring
• The Quill is Precision Ground, for higher accuracy
• Easy operation, simply turn a knob up and down while you are running to change speeds
• Tolerance Test check, each machine is checked for accuracy through a careful inspection process before shipment, the customer can always be sure they will receive a top quality machine that exceeds their expectations
• Longest in class 5 YEAR WARRANTY against defective parts, including electrical

Main Specifications

Model:              PM-833TV

Table Size:        8-1/4×33”
Table T Slot Size: 5/8″
X Axis Travel:  21-3/4” Max
Y Axis Travel:      11” Max
Z Axis Travel (Head): 17-1/2” Max
Max. Distance, Spindle to Table: 20-1/2” Max
Quill Travel, Diameter:                 5”,  2.952″ (75mm) 
Leadscrew Type: Precision Ground ACME Leadscrew W/ Backlash Adjustments on
X and Y Axis
Leadscrew Pitch: .100” (10 Threads Per Inch)
Dial Graduations:   .001”
Spindle Taper:           R8
Spindle Speed Range:   50-3200 Infinitely Variable (Belt Drive, one step, built in VFD Drive for variable speeds)
Speed Change Type:       Knob (speed can be changed while running)
Spindle Bearing Type:  High Precision Tapered Roller Bearings, Fully Adjustable
Spindle Bearing Class:       C5
Main Motor HP:               2 HP
Overall Height, to reach Maximum top of Z Axis Travel: 88”
Height with head at normal working height: 75”
Height of Table Working Surface, mounted on optional stand 39-1/2″
Front to back, rear of machine to front of Y Axis Handle 34-5/8″
Chip Tray Size (At top of base) 30″ x 24-1/2″
Width X Axis Table Handles, Tip to Tip 41-3/4”
Machine Weight 750 LBS (Without Stand) 880 (With Stand) (833TV model is lighter than gear head 833T model due to having a belt drive which is lighter, all the gears, shafts, extra bearings, etc in the headstock are not needed with the belt drive, but same body of machine so same rigidity)
Main Motor Power:      2HP
Voltage / Phase:    220 Volt Single Phase Power (Standard 208V and 240V single phase is fine)
Warranty:                    5 Years

Frequently Asked Questions:

Question 1: What is the difference between the PM-833T, and the PM-833TV?

Answer 1: The PM-833T Machine is a Geared Head Mill, and has 6 different spindle speeds, in a range from 60 to 1500 RPM. The PM-833TV Machine is a Belt Drive Mill, and has an infinitely adjustable speed range from 50 to 3200 RPM.

Question 2: Is there any other difference in the machines, besides what is described above?

Answer 2: No, the body and all other components of the machine are exactly the same, the head is the only difference between the PM-833T and the PM-833TV. All accessories such as power feeds, stands, DRO, etc. are the same between both models.

Question 3: Which one is better for me, the PM-833T, or the PM-833TV?

Answer 3: It really depends what you are doing or think you will be doing. The PM-833T Geared Head will have more power at the lower speeds, so if you are doing a lot of larger, lower speed milling and drilling in Steel / Stainless Steel or similar materials, the PM-833T may be a better machine for you. (The 833T is still fine with cutting Aluminum and similar materials, no problem with that, you just have a lower spindle speed, so you may just have to go a little bit slower with feed rates, but it will still do the job just fine.)

The PM-833TV has more than double the top spindle speed of the PM-833T, and the PM-833TV is a belt drive, so it is quieter running at higher speeds. So the 833TV is a better choice if you are doing more higher speed aluminum cutting and want to get maximum feed rates, but it still has plenty of power at lower speeds for any type of general purpose work in steel, stainless steel, cast iron, etc., just not quite as much power as the 833T at lower speeds.

Either machine can do any materials that you can machine on a mill just fine, some things are just more suitable for one of the particular models.

 

1

Shipping Information

2

Flat Rate Shipping, $199 Anywhere in the 48 US States

Liftgate Available If Needed for $49.  Please add this at checkout.

All Accessory Items ordered at same time will ship at no extra charge with machine.

Machine ships on a pallet that is 45″ x 35″, stand ships on a pallet that is 35″ x 35″

1

Manuals & Documents

2

Click Here for PDF Manual Download  PM 833T 2-14-18 V7 Manual PDF

X Axis Power Feed installation instructions can be found here:  X Power Feed Installation, PM-833T  With a note here:  PM 833T X Feed Gear Note

If your tooling will not fit in to the spindle, it is an easy set screw adjustment, please click here:  R8 Spindle Set Screw Adjustment

Drawing of the mill base below, where it would sit on a bench top or on a stand: (Dimensions are approximate) Measured 833 Hole Pattern

Comparison Charts and other useful information:

Click Here for PM Bench Mills Comparison

Click Here for a useful document on Choosing And Using A Milling machine