NEW! PM-835S Milling Machine

Main High Quality Features:

  • High Grade HT250 Castings
  • Head is made in Taiwan, with the body made in China, allowing for a higher quality machine, at a VERY reasonable price
  • Design is exclusive to us. You will not find another machine that stacks up in features anywhere near this price range.
  • FULL FEATURED milling head. Spindle down feed in 3 steps, (.0015, .003, .008 IPR), 3-3/8″ diameter quill.
  • Same head as used on our larger knee mills, with the cost and space savings of a smaller machine
  • 5″ Quill Travel
  • Head Swivels Left and Right, AND Tilts Front To Back 10 degrees, only machine in this size class with this feature – Allows tramming in all directions for perfect workpiece tolerances – Excellent feature for extremely high precision work!
  • COMPARE EVERYTHING WITH SIMILARLY PRICED MILLS ON THE MARKET – THEY WON’T EVEN COME CLOSE

 

Flate Rate Shipping, $399 anywhere in the 48 US States (Mill comes fully crated), Liftgate $49 If Needed


Add accessories as desired, and then press add to cart. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.

$4,299.00

1 x PM-835S Milling Machine

835S Mill
Clear
$269.99

1 x X Axis Power Feed (Not Installed)

feed

In stock

$99.00

1 x Installation of above X axis Power Feed

$289.99

1 x Y Axis Power Feed (Not Installed)

Feed

In stock

$149.00

1 x Installation of above Y axis Power Feed

Install
$319.99

1 x Z Axis Power Feed (Not Installed)

Feed

In stock

$199.00

1 x Installation of above Z axis Power Feed

$59.99

11 Pc. Precision R-8 Collet Set

Collets

In stock

$59.99

1 x 52 Pc. T Slot Clamping Kit

Clamp Set

In stock

$119.97

5 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$139.99

5 Inch High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise

In stock

$269.99

5 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

Extremely High Quality Vise Hardened Bed for longer life Thrust Bearings on lead screw Made from Strong Ductile Iron Precision Ground Surfaces to .001" Complete with 360 Degree Swivel Base Locking Mechanism with Downward Force to help avoid jaw lifting Removable Jaws can be re-positioned to exterior for larger holding capacity Can be used with or without swivel base Swivel Handle Included Please see pictures for complete specifications

Available on backorder

$149.97

6 Inch Ground Milling Vise w/Swivel Base

Vise

In stock

$399.99

6 Inch W/ 8 Inch Opening Ultra High Precision Homge Vise

Jaws Open Extremely Wide, Clamping Capacity just under 8" Hardened Bed for longer life Thrust Bearings on lead screw Made from Strong Ductile Iron Precision Ground Surfaces to .001" Complete with 360 Degree Swivel Base Locking Mechanism with Downward Force to help avoid jaw lifting Removable Jaws can be re-positioned to exterior for larger holding capacity Can be used with or without swivel base Swivel Handle Included Please see pictures for complete specifications

Available on backorder

$69.99

1/32-1/2 High Precision Keyless Drill Chuck

drill chuck

In stock

$119.99

0-1/2 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

$79.99

1/8-5/8 High Precision Keyless Drill Chuck

Drill Chuck

In stock

$129.99

1/8-5/8 Ultra High Precision Keyless Drill Chuck

Drill Chuck

In stock

From $4,299.00

1

Description

2

Model PM-835S Precision Vertical Knee Type Milling Machines

Typical Users:

  • Industrial users looking for a good quality, full featured, smaller vertical knee type milling machine, built for
    industrial use, with a smaller size to save space, and a lower price in mind
  • High end gunsmiths looking for a smaller knee type milling machine, who wish to maintain the quality and features of a full sized knee mill, but also want to save on space
  • Users who appreciate a full featured knee type milling machine with the space and cost saving
    characteristics this offers
  • Any other users who can appreciate a good quality machine with full features and no shortcuts, in a
    smaller space-saving size, at a very reasonable price for the level of quality that you are purchasing

Main High Quality Features:

  • High Grade HT250 Castings
  • Head is made in Taiwan, with the body made in China, allowing for a higher quality machine, at a VERY reasonable price
  • Design is exclusive to us. You will not find another machine that stacks up in features, and price
  • FULL FEATURED milling head. Spindle down feed in 3 steps, (.0015, .003, .008 IPR), 3-3/8″ diameter quill.
  • Same head as used on our larger knee mills, with the cost and space savings of a smaller machine
  • 5″ Quill Travel
  • Head Swivels Left and Right, AND Tilts Front To Back 10 (approx +/-5) degrees to set spindle to table tram, only machine in this size class with this feature – Allows tramming in all directions – Perfect alignment for the high precision jobs – Very critical, great feature for extremely high precision work!
  • Huge 18″ spindle to table distance with 
  • COMPARE EVERYTHING WITH SIMILARLY PRICED MILLS ON THE MARKET – THEY WON’T EVEN COME CLOSE
  • Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life
  • High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws, .200″ per turn, with large dials)
  • High Precision Spindle with +/- .0002” or less runout for greater tool life and accuracy
  • Balanced pulleys in head for smooth and quiet operation
  • Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when drilling and precision boring
  • Quill is Precision Ground, then Hard Chrome Plated for longer life
  • Tolerance Test Certificate included, each machine is checked for accuracy through a careful
    inspection process before shipment, the customer can always be sure they will receive a top quality
    machine that exceeds their expectations
  • Longest in class 3 YEAR WARRANTY against defective parts, including electrical (excludes normal
    wear items such as belts, bushings, etc)

Main Specifications: (All subject to final verification)

  • Model PM-835S
  • Table Size 8”x35”
  • X Axis Travel 23” (Shortened approx.. 2” with X Power Feed Installed)
  • Y Axis Travel 10”
  • Z Axis Travel (Knee) 16”
  • Min/Max. Distance, Spindle to Table 2”/18”
  • Spindle Height: Floor to Bottom of Spindle: 56”
  • Table Height: Fully Raised 54”, Lowered 38”
  • Quill Travel 5”
  • Leadscrew Type Precision Ground ACME Leadscrew W/ Backlash Adjustments on X and Y Axis
  • Leadscrew Pitch .200” (5 Threads Per Inch)
  • Table Dial Graduations .001”
  • Spindle Taper R8
  • Spindle Speed Range, S Model 80-2720 RPM, 8 steps
  • Spindle Bearing Type High Precision Angular Contact Bearings, Fully Adjustable
  • Spindle Bearing Class C5
  • Main Motor H.P. 3 HP
  • Overall Height, Head Up 89-1/2″
  • Height with head down (For moving and shipping) 60”
  • Depth Front to back, rear of machine to front of knee casting 34”
  • Rear of machine to tip of Y axis handle 40”
  • Width X Axis Table Handles, Tip to Tip 48”
  • Net Weight 1400 LBS
  • Voltage / Phase 220 Volt, Single Phase
  • Warranty: 3 Years
  • Shipping Dimensions: LxWxH 45”Wx45”Lx64” H
1

Shipping Information

2

This mill ships fully crated, crate measures 45″L x 45″W x 65″H (Head ships Flipped Upside Down To Lower Overall Height) – Crating charge is included in shipping above, we FULLY CRATE these models, so your machine will be very well protected for shipping!

Liftgate Service is available for this machine, please select this at checkout if needed.

1

Manuals & Documents

2

Click Here for PM-835S Manual: PM 835S Manual V.1 5 1 2018

Click here for optional PM DRO Manual: PM DRO Manual 1-15-2018