PM-932V Milling Machine
From $3,299.00
PM-932V Main Features:
- Heavier Class Milling Machine, (1000 LBS With Base) For More Rigidity, And Greater Cutting Ability
- Variable Spindle Speeds, offer the ability to fine tune the speed for the job, along with a higher top RPM then geared head models
- Larger Knee Mill Style Table Handles, for Much Better Control By Hand
- True Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws (.100″ Per Turn) For Easier Operation
- Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations
- Optional Stand is Heavy Duty Cast Iron, For Better Vibration Dampening and Rigidity
- Longest In Class, 3 Year Warranty
Be sure to scroll down and open the tabs lower in the page – “Description” shows full specs and details of each configuration, “Manuals and Documents” has the manual and many other items of interest.
Shipping is a flate rate of $299.00
Liftgate Delivery $79 If Needed (Please Select At Checkout)
Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.
Available Machine Options
* ALL Machines now come with larger mill style crank handles for
better feel and easier operation by hand, as shown in main
picture * STAND IS OPTIONAL FOR ALL MODELS, MUST BE SELECTED IF CAST IRON STAND IS DESIRED*
1. PM-932V-BASIC
Includes: Quill DRO, Manual Down Feed on spindle, Variable spindle speeds 50-3200 RPM
2. PM-932V-BASICw/2axDRO
Includes: Quill DRO, Manual Down Feed on spindle, Variable spindle speeds 50-3200 RPM, plus 3 axis DRO Installed
New for 2023, Option DRO is now our PM LCD DRO as shown here:
*If no base is desired, a Sheet Metal Coolant/Chip Tray is also available as an option, if you would still like a chip pan with your machine. This will not work with the cast iron base, because the cast iron base option already has a ship/coolant tray built in.
Main Specifications of PM-932V:
- Spindle Speeds: 50-3200 RPM, 2 Ranges (50-1400 in Low, 100-3200 in High)
- Spindle Drive Type: MultiV Belt (For smoother running)
- Motor Drive Type: VFD
- Table Size: 9″x31.5″
- Max. Table Load Capacity: 300 lbs
- Table T-Slot Size and Number: 14mm / 9/16″, 3 Slots
- Table Travel, X Axis: 22-3/8″ Hand Only, 19.5″ w/ Power Feed
- Table Surface Height from floor, 34-3/4″ (With base flat on floor)
- Base Dimension at floor approx. 18-5/8″W x 27″D
- Bolt Mounting Pattern, Milling Machine Base (Where the machine would bolt to either a work bench or to the cast iron base) Approx. 12-3/4 Wide x 18-3/4 Deep, 9/16” Hole Diameter
- Base of machine casting, bottom of the mill where it would mount to the optional base is approx. 24″ Front to back, 16″ Wide
- Normal Working Max Height: (top of column travel motor) 76-1/2″ (with optional stand)
- Height with head all the way up: (top of main motor) 81-1/2″(with optional stand)
- Stand (Base) height, to machine mounting surface: 24″
- Cross Travel, Y Axis: 8″
- Head Vertical Travel: 17″
- Max. Distance Spindle to Table: 18″
- Quill (Spindle) Travel: 5″
- Lead Screw Type: Inch Pitch Acme Threads
- Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S.
Standard) - Quill Diameter: approx. 3″
- Head Tilt Front to Back: N/A
- Head Swivel: Side To Side, 90 Degrees
- Ram Swivel: N/A
- Power: 220 Volt, Single Phase, 12 Amps
- Motor Horsepower: 2 HP
- Casting Type: Fine Grain Cast Iron
- Country of Origin: China
- Approximate Weight: 1000lbs with Stand, 750 Without Stand
- Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)
Machine ships in 2 crates. Main Crate is 30″W x 30″L x 45″H on a 34″x34″ pallet. Optional Base Ships in a separate crate, Base Shipping Dimensions 24″ W x 30″L x 26″ H on a 40″x48″ pallet.
Liftgate Is Available at $79 If Needed (Please select option at checkout)
Click Here for PDF Manual Download: PM-932M Manual and Parts List
Comparison Charts and other useful information:
Click Here for PM Bench Mills Comparison
Click Here for a useful document on Choosing And Using A Milling machine
