PM-950S / PM-950V Milling Machine

  • Available in 220V Single Phase, Or 3 Phase Power To Suit Buyer’s Needs
  • 3 Axis Full Featured DRO Included (.0002″ Accuracy)
  • X Axis Power Feed Included
  • LED Work Light Included
  • One Shot Lube System Included
  • Way Covers Included
  • High Quality, Full Featured, Yet Economically Priced Milling Machine
  • 3 Year Warranty

PM-950S Is a Step Pulley Machine (Move belts for speed changes)

PM-950V is Variable Speed (Turn a knob for speed changes)

Flate Rate Shipping, $599 in the 48 US States. All accessories from anywhere on this site that are ordered with machine at the same time also ship free of charge! (Will automatically calculate at checkout, just add them to your cart)

Liftgate Delivery is not available for this machine, must ship to a trucking terminal for customer pick up, a place with a loading dock, or a location with a forklift to unload. (Residential is OK, but you need to unload at your end)


Choose Machine Option First, and then add accessories as desired. ALL accessories listed below WILL work with this model. Please do not select any items that show out of stock, or you will get an error message and not be able to add to cart.

PM-950S / PM-950V Milling Machine

$5,999.00
Clear

Y Axis Power Feed for Knee Mills

$289.99
SKU: PF-AL310S-Y

Out of stock

Installation of above Y axis Power Feed (If not chosen, customer to install)

$149.00

11 Pc. Precision R-8 Collet Set

$59.99
SKU: R8-11Pc
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

In stock

Ultra Precision 11 Pc. R-8 Collet Set

$129.99
SKU: R8-11Pc-ULTRA
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

Out of stock

52 Pc. Clamping Kit, for 16mm / 5/8 T Slots

$59.99
SKU: 52PCCK-5/8-16mm
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

In stock

1/32-1/2 High Precision Keyless Drill Chuck

$79.99
SKU: KDCR8-13
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

Out of stock

1/8-5/8 High Precision Keyless Drill Chuck

$89.99
SKU: KDCR8-16
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

Out of stock

0-1/2 Ultra Precision Keyless Drill Chuck

$119.99
SKU: KDCRS-13R8T
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

In stock

1/8-5/8 Ultra Precision Keyless Drill Chuck

$129.99
SKU: KDCRS-16R8T
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

In stock

2 Inch Boring Head Set, R8 Shank

$89.99
SKU: BOR-SET-2-HSS
With HSS Boring Bars
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

Out of stock

5 Inch Ground Milling Vise w/Swivel Base

$119.97
SKU: VISE-5in-PM
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

In stock

5 Inch High Precision Milling Vise w/Swivel Base

$159.99
SKU: VISE-5in-HIGHPREC
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

In stock

5 Inch Homge Ultra High Precision Milling Vise w/Swivel Base

$299.99
SKU: VISE-HAV-5in-SB
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

Out of stock

6 Inch Ground Milling Vise w/Swivel Base

$99.99
SKU: VISE-6in-PM
You can choose a minimum quantity of 1 and a maximum quantity of 10 for this product!

Out of stock

6 Inch High Precision Milling Vise w/Swivel Base

$219.99
SKU: VISE-6in-HIGHPREC
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

Out of stock

6 Inch w/8" Open Homge Ultra High Precision Milling Vise w/Swivel Base

$449.99
SKU: VISE-HAV-6in-SB-SUPER
You can choose a minimum quantity of 1 and a maximum quantity of 5 for this product!

Available on backorder

Power Drawbar for Variable Speed Knee Mills

$599.00
SKU: POWERDBAR-MAXI-VARI
This is ONLY for the Variable Speed Mill (TV Models), will not fit the Step Pulley (TS Models)

In stock

From $5,999.00

SKU: PM-950-page Category: Tags: , , ,
1

Description

2

Standard Accessories:

  1. PM-950 Milling Machine
  2. 3 axis Precision Matthews DRO, Installed (3rd axis on knee travel)
  3. X Axis Power Feed
  4. LED Work Light
  5. Way Covers
  6. One Shot Lube Pump for ways
  7. Power Down/Up Feed On Quill for boring
  8. Hard Chromed Quill for longer life
  9. R8 Spindle Taper

Machine Standard Features:

  • High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250)
    Cast Iron, ribbed for rigidity and strength. – Be sure to ask if comparing.
  • Available in either Single Phase to run on standard 220V Power, or 3 Phase for industrial
    use, Your Choice (Please specify when ordering)
  • Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on
    these machines, while the body is made in China for cost savings.
  • Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy,
    and greatly extends machine life – Box Ways on Y axis means more surface area, and more rigidity.
  • Massive 20″ Wide Saddle for extra table support
  • Turcite B way material on X and Y Axis for smoother table movements and longer machine life –
    compare with others, you will notice the feel right away in the table handles.
  • Head Swivels Left and Right, AND Tilts Front To Back
  • One Shot Lubrication system is standard equipment, which also extends machine life, and
    reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply
    pumping a lever.
  • High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws)
  • High Precision Spindle with +/- .00015” or less runout for greater tool life and accuracy
  • Balanced pulleys in head for smooth and quiet operation
  • Full featured head with automatic quill feeds in 3 steps for boring operations
  • Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when
    drilling and precision boring
  • Power Down Feed on quill is standard, in 3 steps .0015, .003, and .006 Inches per revolution
  • Quill is Precision Ground, then Hard Chrome Plated for even longer life
  • Available with either step pulley speed changes, or variable speeds to suit the user’s
    preferences
  • Built in coolant sump in machine base
  • Tolerance Test Certificate included, each machine is checked for accuracy through a careful
    inspection process before shipment, the customer can always be sure they will receive a top quality
    machine that exceeds their expectations
  • Longest in class 3 YEAR WARRANTY against defective parts, including electrical (excludes
    normal wear items such as belts, bushings, etc)

PM-950S PM-950V Precision Milling Machine Main Specifications:

Model PM-950S PM-950V
Table Size 9”x50”
X Axis Travel 30” with power Feed Installed, Full Way Support at 30″ travel
Y Axis Travel 12”
Z Axis Travel (Knee) 18”
Max. Distance, Spindle to Table 18”
Table Height, Lowered Position Approx. 36”
Quill Travel 5”
Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash Adjustments on X and Y Axis
Leadscrew Pitch .200” (5 Threads Per Inch)
Dial Graduations .001”
Spindle Taper R8
Spindle Speed Range (950S) 80-2720 RPM (8 steps) 80-5440 (opt. 16 steps)
Spindle Speed Range (950V) 70-4200 RPM (Variable)
Speed Change Type 950S Belt Change/ Hi-Low Lever – 950V Variable Speeds / Hi-Low Lever with Variable Knob
Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable
Spindle Bearing Class C7
Main Motor H.P. 3 HP
Overall Height, Head Up 950S 83.5” 950V 87”
Height with head down (For moving
and shipping) 66”
Depth Front to back, rear of machine to front of knee casting 46”
Rear of machine to tip of Y axis handle 51”
Width X Axis Table Handles, Tip to Tip 68”
Machine Weight 950S 2450 LBS, 950V 2550 LBS
Base Bolt Pattern Mounting Dimensions (APPROXIMATE) 20-1/2”W X 33-1/2” L
Voltage / Phase 220 Volt Single phase, or 220/440 Volt 3 Phase, please specify – Requires 20 Amp Circuit for both single or 3 phase models
with order selection above
Warranty 3 Years
Shipping Dimensions LxWxH 5’x5’x6′

 

1

Additional information

2
Accessory Installation

Install Z Axis Power Feed, Install Y Axis Power Feed

1

Shipping Information

2

This mill ships fully crated, crate measures 60″L x 60″W x 72″H (Head ships Flipped Upside Down To Lower Overall Height) – Crating charge is included in shipping costs above, we FULLY CRATE these models before shipment, so your machine will be very well protected for shipping!

Machine ships truck freight. These mills are too heavy for Liftgate Delivery, they must be shipped to a place with a loading dock, trucking terminal, or a place where it can be unloaded by forklift.

1

Manuals & Documents

2

Manual Coming Soon, Please Check Back

Click here for optional PM DRO Manual: PM DRO Manual 1-15-2018